A Beogram 4002 (5521) in visually appealing condition recently arrived for restoration. The turntable came with a known faulty tracking sensor, burned-out 33 RPM indicator lights, and was secured in a double box for safe transport. A previous video on packing a 4002/4 for shipping can be found here. This image shows the inner packaging:

Here is the unit unpacked: Foam pads secured the sub-platter, and importantly, the tonearm and RPM panel were protected with removable tape for shipping.

This 4002 is in excellent condition overall, with only minor imperfections. These include a slight veneer chip on the plinth’s right corner:

The keypad is also well-preserved, showing minimal signs of use:

The dust cover has typical light scratches consistent with its age:

Curiously, the “Beogram 4002” lettering on the rear aluminum trim of the dust cover is missing:

There are a few marks on the arm weight cover, which may be removable:

Functionally, the motor needs lubrication in addition to the non-functional lights. It makes a high-pitched noise when running without the platter, a sign of dried bearings. Furthermore, the transport locks are deteriorating, evident from the orange plastic debris inside the unit:

The included MMC20EN cartridge has a problem with its suspension, the cantilever is misaligned. Interestingly, the previous 4002 restoration had an EN cartridge with the same issue, hopefully not a recurring pattern. Images of the issue:

This can be rectified by Schallplattennadeln.de or Soundsmith, or by finding a reasonably priced replacement on eBay. All in all, this 4002 presents a solid foundation for restoration.